Loading...

Multi-Press

You are here : Home / Multi-Press

Multi-Press

C024ES

The Vitality™ Series Multi-Press features 3 machines in one: bench press, incline press, and shoulder press. Users can adjust press arm and seat while on the machine. Comfortable, oversized grips with multiple positions and simple seat adjustment make it easy for users to get in position for proper exercise form. Users can easily engage the add-on weight with a simple push of a lever to increase the work load.

Line Brochure

Specifications

Equipment Features
Instructional Placard Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts.
Weight Stack Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizesfitted nylon bushings to ensure smooth travel on guide rods.
Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight. Precision, lubricated bushings for smooth operation.
Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position.
Upholstery Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).
Adjustments Press arm adjustment made while seated on the machine. Over-molded yellow handle by grip handle allows user to release press arm and move into one of four positions to accommodate the three pressing motions (shoulder, incline, and chest / bench press). Seat assembly slides smoothly with a custom-molded sleeve-tube over an attractive chrome plated oval tube. Stability of the seat assembly is enhanced by secondary bearing on a chrome shaft. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is yellow color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter.
Water Bottle and Accessories Holder Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder.
Bearings and Pivot Points ABEC-rated sealed bearings for added durability and smooth feel.
Pulleys and Cables Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation. Cables are military spec 5 mm cable coated.
Frame and Finish 11 gauge (2.75 mm) 2×4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability.
General Features 3 machines in one: bench, incline and shoulder press movements. User can adjust press arm and seat while on the machine.

Equipment Specifications
Incremental Add-on Weight 5 lbs / 2.5 kg
Optional Upholstery Colors Mahogany
Imperial Blue
Paprika
Royal Blue
American Beauty Red
Graphite
Terra Cotta
Slate
Standard Shroud Color Translucent
Weight Stack 240 lbs / 110 kg
Workout Area (L x W) 96 x 60 inches / 244 x 152 cm
Standard Upholstery Color Black
Standard Frame Color Gloss Metallic Silver

Equipment Dimensions and Weight
Length 72 inches / 183 cm
Width 48 inches / 122 cm
Height 69 inches / 175 cm
Equipment Weight 450 lbs / 205 kg

Shipping Dimensions and Weight
Length 76 inches / 192 cm
Width 48 inches / 122 cm
Height 31 inches / 78 cm
Shipping Weight 610 lbs / 277 kg

Regulatory
EN957 Yes
ASTM Yes